CompTIA Network+ free practice test for Exam N10-007

This is a five-question example (one per Network+ N10-007 main exam objective) of the level of testing at the CompTIA Network+ exam. This practice test consists exclusively of multiple-choice questions while our CertBlaster Exam Simulator does include the performance-based questions as well. This example aims at demonstrating the level of complexity you can expect at the actual exam.


The sample questions below are all multiple choice. To access interactive questions as well as grading, reports, and your custom “Personal Testing Plan”, you will need the CertBlaster Exam Simulation software.

Question 1

At which layer of the OSI model is a PDU referred to as a frame?

Data Link


A PDU begins its evolution at the Physical layer (Layer 1) where it is a series of bits. At the Data Link layer (Layer 2), it becomes a frame. At the Network layer (Layer 3), it becomes a packet. At the Transport layer (Layer 4), it is a segment and is passed to the upper layers. It is important to be able to correlate the terms and layers when discussing PDUs. For example, when the term “deep packet analysis” is used, you should know that you are talking about a device operating at the Network layer (Layer 3). So, the correct choice is Data Link.

CompTIA Network+ N10-007 exam objectives addressed by question 1

Main exam objective: 1.0 Networking Concepts

Exam sub-objective: 1.5 Compare and contrast the characteristics of network topologies, types and technologies.

Question 2

A SAN 10+ Gb Ethernet creates overhead on both the CPU and OS. Which of the choices provides the highest efficiency along with low overhead and latency?

Fibre Channel


While Ethernet-based standards and protocols are extremely fast, the InfiniBand protocols reduce the workload on server OSs and hardware. This results in faster data transfers with considerably lower latencies. The correct choice is therefore InfiniBand.

CompTIA Network+ N10-007 exam objectives addressed by question 2

Main exam objective: 2.0 Infrastructure

Exam sub-objective: 2.4 Explain the purposes of virtualization and network storage technologies.

Question 3

The acronym MTTR is used in your documentation. How would you prepare to reduce this factor?

Predict the occurrence
Use MTBF and have replacements on hand
Create a solid response policy
Reduce the stresses on the components


MTTR is the Mean Time To Repair. This indicates a failure with a calculated replacement timeline. The best way to reduce this time is to have the parts on hand. If you know that a server drive running 24/7 will fail within a specified timeframe, have one on hand. Having said this, the chances are high that you will upgrade most devices before they fail. The correct choice is therefore “Use MTBF and have replacements on hand”.

CompTIA Network+ N10-007 exam objectives addressed by question 3

Main exam objective: 3.0 Network Operations

Exam sub-objective: 3.2 Compare and contrast business continuity and disaster recovery concepts.

Question 4

There are rumors of widespread layoffs in a company. A programmer that feels at risk modifies his programming to execute malicious device encryption code if he is unemployed at the end of the month. The infected device(s) will display instructions requiring payment to regain control of the device(s). How would you categorize this action? (Choose two)

Logic bomb
Trojan horse
Back door



Logic bombs are classic demonstrations of time-dependent malware. The code that executes encrypts the device and demands payment, classifying it as ransomware. The correct choices are Logic bomb and Ransomware .

CompTIA Network+ N10-007 exam objectives addressed by question 4

Main exam objective: 4.0 Network Security

Exam sub-objective: 4.4 Summarize common networking attacks.

Question 5

You have concluded that two hosts have duplicate IP addresses on your network. How could this happen?

They are using static IP addresses
They are using the wrong gateway
DHCP leases are too long
None of these


In this case, you would check the IP addresses and make sure they are not statically assigned. If one host must use a static address, reserve it in the DHCP scope and assign the second host to use DHCP. The correct choice is “They are using static IP addresses”.

CompTIA Network+ N10-007 exam objectives addressed by question 5

Main exam objective: 5.0 Network Troubleshooting and Tools

Exam sub-objective: 5.5 Given a scenario, troubleshoot common network service issues.

CertBlaster exam simulator for CompTIA Network+ N10-007

The questions above are all multiple choice. Below is a screenshot of one of the performance-based questions available in the interactive CertBlaster exam simulation software.

The CertBlaster practice tests for Network+ N10-007 includes over 500 questions. It also includes the CompTIA Performance Based Question type, see below example of a CertBlaster PBQ.

Screenshot of a Network+ N10-007 Perormance based question
Network+ N10-007 Performance-based question

Example of a performance-based question in a CertBlaster Network+ N10-007 practice test

10 thoughts on “CompTIA Network plus N10-007 free practice test exam questions

    1. You are most welcome! And thank you for reaching out.

  1. Hello,
    Please I will like to purchase your Network Plus Exams. Are they answers listed in there as well?


    1. Hi Sarah, yes the answers are listed for every question in Study Mode. In Certification and Assessment mode they are hidden. You get to pick each time you launch an exam or drill which of the three modes you want that session to be in.

      Best of luck on your quest for Network+ certification!

  2. Hi,

    Are the questions Comptia approved? Are they similar to what you’ll be seeing in the exams?

    1. Yes, our Network+ N10-007 is “CompTIA Approved Quality Content”. This means the questions cover every last exam objective and topic point and that they are all dialed in to the exact level of the exam. You can see the CompTIA Approved logo in the right margin on the Network+ product page at

      Best of luck on your quest for certification!

      1. How long can you keep certblaster once you purchase it .

        1. Hi Pedro, your CertBlaster license is valid two years from first activation.

  3. IS there a possibility to purchase only the simulation part of the questions? OR say purchase both multiple choice and simulations apart. I particularly like your questions because each of them include acronyms .
    The key to success is knowing what these acronyms mean.

    1. Hi Jam, Thank you for your interest in CertBlaster. The CertBlaster software is a practice question bank that is integrated into the exam simulator. One cannot be separated from the other as the complement each other. Best of luck in your quest for certification!

Leave a Reply

Your email address will not be published. Required fields are marked *

On Facebook

Trust Guard Security Scanned
Share This
Real Time Web Analytics